Novelties

N for 10,3mm /.400'' - NEW SERIES
N for 10,3mm /.400'' - NEW SERIES
SOLDER "N" MALE          Compatible with:AIRBORNE 10 | BROAD PRO50 C | EXTRAFLEX BURY |HYPERFLEX 10 | RG 213 PLUS | ULTRAFLEX 10 |        Why choose this connector? • Compression design with double seal that ensures better protection against infiltration of water, humidity and condensation.• Easy installation and welding instructions included in the package (no braid soldering needed). • Dramatic suppression of the background noise, improvement of screening attenuation and insertion losses.• The surfaces are treated with a special alloy called Smart3-Alloy®: it is corrosion-resistant and hypoallergenic.• The new designed pin prevents excess of tin and the consequent heating, which damages the dielectric causing an uncontrollable alteration of the electrical properties of your cable (differently from standard PL259 which is exposed to strong thermal stress).• By adding our ''HEAT SUPPRESSOR"  you will also add durability and constancy of performance.       NOTES:  1. price ...
Details
delivered in 2/3 days
€ 7.50
Select
N for 7,3mm /.287'' - NEW SERIES
N for 7,3mm /.287'' - NEW SERIES
SOLDER "N" MALE          COMPATIBLE WITH THE FOLLOWING MODELS:  ULTRAFLEX 7 /.287''       Why choose this connector? • Compression design with double seal that ensures better protection against infiltration of water, humidity and condensation.• Easy installation and welding instructions included in the package (no braid soldering needed). • Dramatic suppression of the background noise, improvement of screening attenuation and insertion losses.• The surfaces are treated with a special alloy called Smart3-Alloy®: it is corrosion-resistant and hypoallergenic.• The new designed pin prevents excess of tin and the consequent heating, which damages the dielectric causing an uncontrollable alteration of the electrical properties of your cable (differently from standard PL259 which is exposed to strong thermical stress).   NOTE: price is for ONE connector.  
Details
delivered in 2/3 days
€ 7.50
Select
EXTRAFLEX BURY /.400"
EXTRAFLEX BURY /.400"
[10,3 mm / 0,405 inches Cable]                       WHY CHOOSE THIS CABLE:   - The only 10,3mm coax that can be use both for rotor operated antennas or direct burial / outdoor use!   - It has the same excellent attenuation of Hyperflex 10, including 19 wires in the central conductor which provides great flexibility. The only difference lies on the sheath, made of polyethylene (just like Airborne 10), that gives more resistence to the cable, so that it can be direct buried without problems.    - We have applied an extra Petrol Jelly layer that helps the cable to prevent oxidation and makes it totally waterproof!   ##avviso50ohm##  
Details
delivered in 2/3 days
to € 3.50
Select
UHF (PL-259) for 7,3mm/.287" - EVOLUTION
UHF (PL-259) for 7,3mm/.287" - EVOLUTION
SOLDER "PL-259" MALE       Compatible with: ULTRAFLEX 7     Why choose this connector? • Compression design with double seal that ensures better protection against infiltration of water, humidity and condensation.• Easy installation and welding instructions included in the package (no braid soldering needed). • Dramatic suppression of the background noise, improvement of screening attenuation and insertion losses.• The new designed pin prevents excess of tin and the consequent heating, which damages the dielectric causing an uncontrollable alteration of the electrical properties of your cable (differently from standard PL259 which is exposed to strong thermal stress). • In typhical UHF (PL259) threaded RF connectors it is necessary to fill the center conductor pin with melted solder, Evo's rounded Pin eliminates the problem of solder burrs. Sophisticated machining improves the opening of the plug's bottom and facilitates introduction of the cable's conductor.• The new UHF ...
Details
delivered in 2/3 days
€ 7.50
Select
UHF (PL-259) for 10,3mm /.400'' - EVOLUTION
UHF (PL-259) for 10,3mm /.400'' - EVOLUTION
SOLDER "PL259" MALE       Compatible with:AIRBORNE 10 | BROAD PRO50 C | EXTRAFLEX BURY |HYPERFLEX 10 | RG 213 PLUS | ULTRAFLEX 10 |     Why choose this connector? • Compression design with double seal that ensures better protection against infiltration of water, humidity and condensation.• Easy installation and welding instructions included in the package (no braid soldering needed). • Dramatic suppression of the background noise, improvement of screening attenuation and insertion losses.• The new designed pin prevents excess of tin and the consequent heating, which damages the dielectric causing an uncontrollable alteration of the electrical properties of your cable (differently from standard PL259 which is exposed to strong thermal stress). • In typhical UHF (PL259) threaded RF connectors it is necessary to fill the center conductor pin with melted solder, Evo's rounded Pin eliminates the problem of solder burrs. Sophisticated machining improves the opening of the plug's bottom ...
Details
delivered in 2/3 days
€ 7.50
Select
Heat Suppressor for 13mm/.500"
Heat Suppressor for 13mm/.500"
Pairing exclusively  to connectors with code CO.N.13M-SL e CO.UHF.13M-SL (''N'' or ''UHF''  suitable for ULTRAFLEX 13 and HYPERFLEX 13).   The result is an extension of the operational life of your valuable cables and a greater homogeneity of their performance in hot enviroments. Please check in our catalogue (at Page 33), how much, higher temperature will affect attenuation in the Graph coefficient K4: Attenuation vs Temperature ratio.  The benefits of our Heat-Suppressors will also be more evident for those who use high power linear amplifiers  for prolonged periods during contests. Cooling and stabilizing the cable, could be the ace in your sleeve!   INSTRUCTIONS: simply screw it into the bottom of the connector, after having removed the original ''screw on'' component. M&P Heat Suppressor is provided with a O-ring and a teflon disk, protecting the cable jacket from the ...
Details
delivered in 2/3 days
€ 12.00
Select
Heat Suppressor for 10,3mm/.400"
Heat Suppressor for 10,3mm/.400"
Pairing to ''N'' or ''UHF'' connectors for 10,3mm (.400") cables.   Compatible with:AIRBORNE 10 | BROAD PRO50 C | EXTRAFLEX BURY |HYPERFLEX 10 | RG 213 PLUS | ULTRAFLEX 10 |    The result is an extension of the operational life of your valuable cables and a greater homogeneity of their performance in hot enviroments. Please check in our catalogue (at Page 33), how much, higher temperature will affect attenuation in the Graph coefficient K4: Attenuation vs Temperature ratio.  The benefits of our Heat-Suppressors will also be more evident for those who use high power linear amplifiers  for prolonged periods during contests. Cooling and stabilizing the cable, could be the ace in your sleeve!   INSTRUCTIONS: simply screw it into the bottom of the connector, after having removed the original ''screw on'' component. M&P Heat Suppressor is provided with a O-ring and a teflon disk, ...
Details
delivered in 2/3 days
€ 11.00
Select
Newsletter
Pay with

PayPal Mastercard Visa Postepay American Express

Ship with

GLS UPS TNT DHL FEDEX

Messi iso-certified

Messi & Paoloni Srl Tel. 0712861527 Email: web@messi.it Via Giovanni Conti, 1 60131 Ancona (AN) - Italia Cod. Fiscale 00109100420 Partita Iva 00109100420
EGESTX Engine (Copyright © 2000-2020 NTX Web business)